The first generation chip, when the energy conversion efficiency is very low, not people's attention over the years.In recent years, because the energy crisis, the development of new energy has become a matter of urgency, power generation chips taken seriously.Now there are already many national research institutions into research and development in this area.Energy conversion efficiency and growth life primary objective.Currently fruitful.The future development direction and solar combined to catch up and surpass solar power module technology.
Power chips commonly used in applications as follows: thermal power plants, geothermal power generation, vehicle exhaust heat power generation ship, pipeline or gas pipeline cathodic protection.
Installation Notes:
Power chips must be installed on a flat surface (especially by the cold).Installation height error should not exceed 20 microns
Pressure is less than 12-15Kg/cm2
Heating surface temperature not exceeding 200 ℃
Note: TGM-generation module Kryotherm proprietary naming
127 - Component generation unit is 127 pairs, NP node number 254, in series between the circuit structure
1.4-1.5 - grain cross-section of 1.4 * 1.4mm, height 1.5mm
